manualshive.com logo in svg
background image

Powered Anode System • 3

INTRODUCTION

WARNING 

Electric Shock Risk
Contact with electrical 
components can result in 
severe injury or death from  

 electrical 

shock.

• 

Ensure that power to the module 
is disconnected before installing 
or servicing the Powered Anode 
System.

• 

Electric water heaters only: 
Disconnect power to the water 
heater by opening the circuit 
breaker(s) before installation or 
service.

• 

Use a non-contact circuit tester to 
confirm that power is off before 
installation or service.

How Does the Powered 
Anode System Work?

The Powered Anode System replaces 
sacri

fi

 cial anodes which are normally 

shipped with water heaters.  

In order to protect the water heater 
from corrosion, a tradi  onal anode 
deteriorates over   me.  As a result, 
when an anode is consumed by the 
corrosive e

 ects of water, the tank 

will begin to deteriorate.  Leaks result.  
However, the Powered Anode System 
will not be consumed over   me, and if it 
is not working properly, its alert system 
will no  fy you.      

In short, the Powered Anode System 
measures the low levels of voltage that 
exist in the tank’s water.  It then supplies 
the necessary current (very slight) to 
help protect the tank’s metal parts.  It 
may also control water odor.  

NOTICE:

  The powered anode system 

must remain plugged into a non-
switched, powered outlet.  Failure to do 
so could result in water heater damage, 
leaks, and property damage.

On Which Models Can I 
Use the Powered Anode 
System?

The Powered Anode System can be 
used with any water heater which is 
50 gallons or less.  Also, the water 
heater must have a stand-alone anode 
(i.e., the anode is not combined with 
an outlet nipple).  If you are unsure 
of your anode’s location, refer to the 
manual or call the manufacturer’s 
technical assistance number.
   

Figure 1:

 Front view of module

Figure 2:

 Back view of module

Figure 3:

 Anode (electrode) included in Powered Anode System*

* Wire harness not shown.

Figure 4:

 Power supply 

(Cord length: approx. 58 inches)

Содержание Product Preservers Powered Anode System









Отзывы: