Operating and Assembly Instructions – A.B.S. Flexilo ECO for wood pellets
Scope of delivery
Subject to technical change
Issue 09/2016
Page 16 of 32
©A.B.S. Silo- und Förderanlagen GmbH
4.2
Optional Accessories
Depending on boiler-type resp. on the conveying system of the heating system; different
extraction systems are offered for the Flexilo for wood pellets.
Pos. Illustration
Description
1
Exhausting box
For direct access of the suction-hoses from
the suction-blower. This system does not work
with all suction-blowers.
Accessories: Tension band, Tension ring,
Bottom-part of the box, Upper-part of the box
2
Screw boxes
To adapt different screw systems
Accessories: Tension band, Locking-gate-
valve
3
Spiral conveying system
Spiral conveying system to transport the
Pellets with a suction system.
Accessories: Tension band, Stop valve,
Tension ring
Optional accessories
Please note, that you can also take discharge units from the boiler producer.
E.g. from ETA -> HP-ETA
from Fröling -> HP-FRÖLING
Pay attention to the installation notes for screws and spiral conveyors, avoid bends
and radii, transfer stations and long transport distances.
With suction conveyor systems it is important to pay attention to the maximum
conveying distance. Mostly < 25 m. Ascends in the conveying line have a positive
effect on transport.
Heed the assembly instructions of the respective conveyor systems.
When the exhausting box will be installed the suction hoses are supposed to be laid
on top of each other.
This is just an excerpt from our delivery program of extraction-systems. If you have
questions to alternative systems please do not hesitate to contact us.
