A & T Internationale Xserve, Источник сервиса

Страница: 24 / 165

Xserve (Late 2006) Take Apart — FB-DIMM Memory
24
Installation Rules
You must install DIMMs in pairs, and the DIMMs in each pair must be identical (the same
size, speed, etc.). The first pair is installed in slots 1 and 2. Install the next pair in slots 3 and 4.
Subsequent pairs go in slots 5 and 6, and then slots 7 and 8.
The server comes
with at least 2 DIMMs
Add the next pair
in these two slots
(Back)
1 2 3 4 5 6 7 8
(Front)
Add the next pair
in these two slots
Add the next pair
in these two slots
For Best Performance
For the best performance, use identical DIMMs in all slots and fill up slots 1 through 4 before you
install DIMMs in slots 5 through 8. If you don’t have eight identical DIMMs, install identical DIMMs
in slots 1 through 4 and a second set of four identical DIMMs in slots 5 through 8. If you can, after
you fill slots 1 through 4, add a full set of four DIMMs in slots 5 through 8 instead of just a pair in
slots 5 and 6.
Tools
No tools are required for this procedure.
Preliminary Steps
Before you begin, open the Xserve and place the bottom housing on a sturdy, flat surface.