A & T Internationale Xserve, Источник сервиса

Страница: 119 / 165

Xserve (Late 2006) Take Apart — ID Tab
119
ID Tab
Note: Because you must remove both processor heat sinks during the preliminary steps of this
procedure, you must replace the thermal grease on both processors when reassembling the
Xserve. New grease and alcohol wipes for cleaning off the previous grease are supplied with the
replacement ID tab. The grease and wipes are also available through a separate thermal grease
kit on GSX; order part number 076-1237, which contains enough grease for both processors.
Tools
No tools are required for this procedure.
Preliminary Steps
Before you begin, open the Xserve; place the bottom housing on a sturdy, flat surface; and
remove the following:
Both power supplies •
PCI riser cards and any expansion cards in both slots •
Airflow duct •
Fan array •
Backplane-to-logic board I/O cable •
Both processor heat sinks •
Logic board •