A & T Internationale Xserve, Источник сервиса

Страница: 146 / 165

Xserve (Late 2006) Troubleshooting — Symptom Charts
146
Verify the firmware is the most recent version for that drive. Check Software Downloads for 6.
any current update.
Reinstall system software. 7.
Reseat the optical drive cable at both connectors. 8.
Replace the optical drive cable. 9.
Replace the optical drive. 10.
Optical drive does not accept disc
If the Xserve is locked, unlock it. 1.
Verify the disc is not warped. 2.
Verify the disc is not the wrong size. Refer to article 58641 “Macintosh: Using Nonstandard 3.
Discs in disc-ROM or DVD-ROM Drives.”
Replace the optical drive. 4.
Optical disc will not eject
If the Xserve is locked, unlock it. 1.
Verify the disc is not in use by the system. 2.
Drag the disc icon to the trash or select it and press Command-E. 3.
Connect a USB mouse and restart the Xserve while holding down the mouse button to 4.
attempt to eject the disc.
Verify that the bezel over the slot is not bent. If it is, gently bend it back into position. 5.
Reseat the optical drive cable at both connectors. 6.
Replace the optical drive cable. 7.
Replace the optical drive. 8.
USB Devices
At startup, cursor does not move with the Apple mouse
If the Xserve is locked, unlock it. 1.
Verify that mouse and keyboard connections are secure. 2.
If the mouse is connected to the keyboard, connect the mouse to one of the USB ports on 3.
the back panel instead. If the mouse works, replace the keyboard.
Replace the mouse. 4.
If the mouse is connected to one of the USB ports on the back panel, switch to the other 5.
USB port. If the mouse operates correctly, replace the logic board. (You can also use System
Profiler to verify USB ports.)