9dot C-POE, Руководство пользователя

Страница: 20 / 33

20
C-POE / C-TER MANUAL VER. 1 REV. 1
Web Interface
Link
To connect to the C-POE / C-TER controller there are two modes: Ethernet and Wi-Fi.
For the Wi-Fi connection we must look for the SSID of the type "C-POE_#" or "C-TER_#" generated by the device itself.
The "#" symbol indicates the serial number on the label affixed to the base unit of the device.
C-POE / C-TER can also function as a router via NAT (Network Address Translation) functionality. This means that by
activating NAT and Wi-Fi, you can have access to the Internet via C-POE / C-TER on your mobile device or computer (only
if an Internet connection via ethernet interface is provided).
Both NAT and Wi-Fi are enabled by default and can be turned off from the interface.
The web interface works with the following browser versions and later:
•
Chrome: Version 91.0.4472.114 (Official Build) (x86_64)
•
Firefox: 87.0 (64-bit)
•
Microsoft Edge: Version 91.0.864.48 (Official Build) (64-bit)
•
Safari: Version 14.0.3 (16610.4.3.1.7) (*)
(*) This browser has only reported problems viewing logs.
Access
Type the default IP address (192.168.9.1 for access from ethernet, 10.9.9.1 for access from Wi-Fi) in the address bar of your
browser. Username and password will be required for identification. Use the same credentials as the SSH. The default
credentials are:
•
Username: admin
•
Password: password
As soon as you have logged in for the first time, it is advisable to change your credentials from the user button at the top
right and choose "Change password".