9dot C-POE, Руководство пользователя

Страница: 11 / 33

11
C-POE / C-TER MANUAL VER. 1 REV. 1
Physical interface
OPT button
The OPT button has been set up which, depending on the long press time, performs the following operations:
OPT Long press Description
Wi-Fi the OPT LED starts to blink, after about 5
seconds it turns off Turn the Wi-Fi interface on or off
RESET after about 30 seconds Configuration reset and restoration to factory parameters (*)
Table 1 - OPT button functions
(*) resets the admin user's password to default configuration. Through the interface you can choose to restore the IP address as well.
LED coding
To know the general status of the product, consider the first 3 LEDs on the left of the front.
LED Color Description
OPT Off
Flashing green 500ms OPT button not pressed or interval for Wi-Fi toggle
OPT button pressed
STATUS Solid blue
flashing blue Properly powered device
Boot phase in progress
ALARM solid red Fault detected
Table 2 - General status LED indications
To see the status of the individual port, refer to the table below:
C-POE C-TER Color Description
• •
flashing white Identification requested on the port
• •
flashing red Port disabled or faulty
•
red GigaKey inserted incorrectly or invalid
•
flashing purple GigaKey missing
• •
violet Restarting the port (power cycle)
• •
flashing green
Solid green Port enabled, load not detected
Port enabled, load detected
Table 3 - LED indications on ports