5Pascal 19116384, Руководство пользователя

Страница: 24 / 35

User Manual
LIOSMART 100
24
4. Recording period:
 Here you can set the printing interval for printer. You can set the interval from 1 min to
200 min.
If printer is not connected to the machine printing should be switched off = 0 min!
To change value press .
5. Shelve temperature setting
 Set desired shelve temperature for the first step.
To change value press .
6. Vacuum / pressure for step 1 .
 Set the desired vacuum / pressure for the first step.
To change value press .
7. Difference between material temperature and shelve to jump to next step
 You can set difference between shelve temperature and material temperature to
jump to next step
When this is set to ±99 °C , step will only run for duration time!
When this is set to for e-3°C step will wait that the difference betwean
shelve temperature and material temperature is -3°C + duration time.
This function works in freezing as well as in other (drying) steps.
8. Cooling / Heating speed
 You can set temperature change rate of the shelve (°C/min)
(1°C/h…..250°C/h)
(system limits apply!)
9. Duration time
 Set desired duration time for (in time range from 1 min to 1440 min).
 Duration time can also be set endless (under 1 min or above 1440 min)
If you selected more than 1 step, then parameters for other steps must be set the same way
as for the first step.
When you finish with settings return to main menu by pressing .