5Pascal 19116384, Руководство пользователя

Страница: 20 / 35

User Manual
LIOSMART 100
20
1. Select program
 Select desired program to set settings. Program 0 is reserved for manual
program
2. Program name
 Enter program name (the selected program can be named). Use numpad to
enter letters and numbers
3. Shelve temperature
 Set desired shelve temperature (temperature range is limited by machine
capacity).
Heating and cooling with closed loop thermal fluid.
4. Vacuum
 Set desired vacuum/pressure in chamber. On display you can see an available
vacuum range in mbar.
5. Condenser working mode:
- OFF
- Cooling: should only be used for shelf conditioning and not for material freezing
- Defrosting: when defrosting condensate must be drained from chamber
6. Cooling / Heating speed
 You can set temperature change rate of the shelve (°C/min)
(1°C/h…..250°C/h)
(system limits apply!)
7. Recording period
 Recording interval can be set from 1 in 200 minutes or switched off
ATTENTION:
If you set value lower than 1 minute recording is set to OFF!
ATTENTION:
If you set value 0.0010 mb, vacuum line towards vacuum pomp is constantly open!