75
Flash memory and restart automatically. When Video Server starts writing firmware, both status
LED indicators will stay on until system restarts. It takes about 30 to 40 seconds. User must keep
the power stable during the update process. After the system restarts, Video Server may need
installation depending on whether the “Reset network at next boot” option is enabled or not.
After Video Server boots up, reload the web page in the browser.
If power fails during the software upgrade, the program in the memory of Video Server may
be destroyed permanently. If Video Server cannot restart properly, ask the dealer for technical
service.
Содержание IPVS1A
