4xem IPVS1A Скачать руководство пользователя страница 100

Страница: 100 / 103

A. In a modem environment, it is because the bandwidth of PPP connection is far less than

Ethernet. If the difference of the timestamp is not stable, adjust the UART FIFO lower in both

receiving and transmitting from modem property in the control panel. While in Ethernet, it may

be due to time taken in storing snapshots into memory upon events occurring.

Q. How does Video Server detect the supported PTZ cameras automatically?

A. If there is no camera detected, Video Server will monitor the CTS of the camera control cable

continuously. As long as the CTS is detected, Video Server will try to handshake with supported

cameras until a supported camera is found. There is no more camera detection once a PTZ

camera is recognized.

Q. How many users are allowed to watch Video Server at the same time?

A. Basically there is no limitation of users. However the video quality also depends on the

network bandwidth. To achieve the best effect, Video Server will allow several users to be

connected. It is recommended to build another web server to host a large quantity of users by

retrieving images from Video Server periodically.

Q. How fast is the video rate of Video Server?

A. The MPEG4 codec can process 30 frames per second internally. However the total

performance is subject to many coefficients as follows:

1. network throughput.

2. bandwidth share.

3. number of users.

4. the complicated objects in view results in larger image file.

5. the level of your PC or notebook which is responsible for displaying images.

In general, the transfer rate in a general local network environment can achieve over 200

kilobytes per second and approximately 10 to 20 pictures of a normal environment per second.

Q. How can I keep Video Server as private as possible?

A. Video Server is designed for surveillance purposes and has many flexible interfaces. The user

Содержание IPVS1A








































































































Результаты поиска

Содержание IPVS1A

Отзывы:

4xem IPVS1A, Руководство пользователя, Страница: 100 / 103

Результаты поиска

Содержание IPVS1A

Отзывы: