4xem IPVS1A, Руководство пользователя

Страница: 67 / 103

62
One-shot fast configuration via FTP
For quick setup of Video Server, the administrator can utilize the default CONFIG.INI that may
be downloaded from the FTP daemon of Video Server. To log into the FTP daemon, enter “root”
as the user name and the same password used when connecting to the Web server. The serial
number of Video Server is the password for the initial access.
Then administrators only need to modify necessary fields and then upload the file to Video
Server with the file name “CONFIG.INI”. To reduce error in interpretation, it is recommended
that the downloaded template CONFIG.INI be modified using the options following each item in
the sample below. The file will include seven categories: [SYSTEM], [NETWORK], [VIDEO],
[SERIAL], [ALERT],and [LAYOUT]. The category name in brackets should be in upper case.
The item name in angle braces should be in lower case. Some items related to disable/enable
should use the keywords “YES”/“NO”. The number zero entry in <user name> and <user
password> is for the administrator, i.e. “root”.
Since the password when logging into FTP is not encrypted, it is recommended to use the Web
instead of FTP to configure the system afterwards. If some parameters other than the network or
camera drivers are changed, administrators can set <reset system> to NO to avoid resetting the
system. It will automatically return to YES during the next downloading of CONFIG.INI.
A sample CONFIG.INI is attached below. The italic text following each line describes the format
of the field and the bold italic characters are the possible values of each field.
******* sample file **********
Video Server Initial Configuration File
[SYSTEM]
<reset system>
YES or NO
<host name>