31
To make Video Server successfully work in dial-in and dial-out modes, follow the procedures
below for basic configurations. If people other than the administrator will be allowed to use
Video Server, the administrator should add these user profiles in the Security option. When
Video Server accepts dial-in connection and acts as a server, the user name and password used in
dialing are the same as what was stored in the user database managed for web access. Any
managed user can be authorized during PPP negotiation and access web pages. However only
administrators can access the configuration page.
There is more information needed for correct modem operation. Refer to the modem setting
section in configuration for further settings. Video Server will wait for someone to dial in. If the
administrator has setup some conditions in the application, Video Server will automatically dial
out based on the administrator's configuration. Refer to the application section in configuration
for special security applications. After everything is set and saved, turn off Video Server and
replace the null modem cable with modem for dial-up network. Since the null modem connection
is used to configure Video Server in advance for modem connection, administrators cannot
connect again without restarting the system.
If dial-out configuration is activated, Video Server will dial out to send a system startup log to
test and drop the call after the pre-configured period.
Содержание IPVS1A
