4tek RAIN2+, Инструкция по установке и эксплуатации

Страница: 31 / 36

31
During the product operation, press SET button to check current and voltage.
Frequency (SET) – Current (SET) – Voltage (SET) – Frequency
•
Automatic reset mode
When any inverter error is occurred, power switch-off until signal is gone.
And power switch-on again to reset
•
Off-timer function for 20 seconds
When suction signal is off, suction motor is reducing motor speed gradually and it stop
after 20 seconds. It reduces any remaining residue of water & blood in the suction hose.
6. Maintenance
6.1. Cleaning suction inlet filter
•
Pull out filter part from machine in counter-clockwise direction of cover.
•
Clean filter in running water for removing particle or debris.
(Recommending it cleaned at least twice per month for avoiding reduction of suction power)
•
Re-connect filter
CAUTION
If the machine installed into the used suction tubing line, old debris and dirty
particle may clogged filter. In case of this, please clean filter frequently for
some period of time until tubing line is cleaned