4tek RAIN2+, Инструкция по установке и эксплуатации

Страница: 24 / 36

24
3.5. Mounting
Rubber feet are attached to the product. Rubber feet are excellent for applications involving
a semi-flexible surface such as a bench top; they help to isolate noise and eliminate
creeping. However, the horizontal position of the motor shaft should be preferred.
3.6. Installation location
The suction system should be located preferably in a clean, dry and well ventilated area.
Please be sure not to block the ventilation ports located on the motor housing. The unit
should be placed where the surrounding temperature remains between 10
o
C and 40
o
C (50
o
F
and 104
o
F). Always check to insure the location chosen is protected from direct or indirect
moisture contact.
Place suction outlet valve higher position than drainage to prevent backflow problem.
Hose connection
Diagram of Suction tubing
of RAIN2+
Diagram of Suction
Tubing of RAIN3+
Diagram of Suction Tubing
of RAIN4+
Please be sure not to be bended any of suction inlet hose and outlet hose. This can causes