4O3A Signature – Antenna Genius User Manual
Page
53
of
56
10.
OPERATION
AG can operate both locally and remote.
Locally, it is the part of your own LAN and the most common
Remotely, AG is part of another network. It is up to you to choose how to access to that other
network. The common way is to use VPN. Remote AG does not require remote PC.
11.
ADDITIONAL FEATURES
11.1.
Output Module Relay Control
You can now control our OM modules, originally designed for Station Genius. OM Module is
actually a relay switching board, with 16 pairs of outputs.
11.2.1 Output Module Hardware
Outputs P1A and Outputs P1B are different contact of DPDT relays. Each port can be used
differently
to supply internal 12V (not recommended), any external voltage, or GND.
In other words:
•
Every logical output (Outputs labeled 1,2,3... in software/on the sticker) has two physical
outputs (P1A, P1B).
•
This is to enable switching of two separate independent devices.
•
These two physical outputs can be configured differently.
•
Either one of them can be set to in12V, external voltage or GND.
Port 2 outputs, pinout, jumpers are the same as for Port 1.
If you select GND as output control signal, position of EXT/INT jumper doesn't matter.
