4O3A Signature – Antenna Genius User Manual
Page
34
of
56
IP Address
Internet Protocol Address, a numerical label assigned to each device
participating in a computer network that uses the Internet Protoco for
communication, AG uses IPv4 addresses set by DHCP or manually
Subnet Mask
Set by DHCP or manually, usually 255.255.255.0
Default Gateway
The LAN address of the router, set either by DHCP or manually
Port A Mode
Control method for Radio Port A as set by DIP switches, either LAN,
GSD, BCD or PTP.
Port A Band
Current band detected for Port A Radio
Port B Mode
Control method for Radio Port A as set by DIP switches, either LAN,
GSD, BCD or PTP.
Port B Band
Current band detected for Port B Radio
9.3.
Is your firmware up-to-date?
If the firmware on your AG is older than the latest AG firmware, you should update your AG
before proceeding to the rest of the setup sets.
The firmware version should always match the app version.
Since version 3.03 the firmware file is included into the app. There is no need to download a
separate file anymore.
Before updating the firmware, you should make sure you have the latest version of the AG
Windows app by checking the
page. Updating the app is simple, just
download and install using the same procedure as in an Initial Set-up described in 9.1 above.
Don’t worry, your current app user data will
not
be overwritten.
