background image

Tutorial 5: Creating Slices 

You can combine Copying and setting the Trim/Loop points to create multiple slices of a sample, and 

store those slices into sample slots. 

1. Go to the sample you want to slice up on the left side of the STS.

2. On the right side, go to the destination bank where you want to store the slices (see the 

“Navigating Banks” section for how to go to an empty bank).

3. Turn the right 

Sample

 knob to the slot you want to put the first slice in.

4. Now hold 

Edit

+

Copy

 (right 

PLAY

 button) for half a second. You just copied the sample from the left 

side to the right side!

5. Turn the right 

Sample 

knob to the next slot and hit 

Edit

+

Copy

 again. Repeat until you created 

enough copies.

Now we’re going to set the loop/trim points on each copy:

6. On the left side, go to the same bank the right side is in.

7. Set the left 

Sample

 knob to the slot you want to edit.

8. Use 

Edit+Scrub Start

 (right 

Start Pos

 knob) and 

Edit+Scrub End

 (right 

Length

 knob) to scrub the 

beginning and end points.

9. When you found the start/end points you like, set the left 

Sample 

knob to the next slot and repeat 

step 8.

10. Don’t forget to do 

Edit

+

Save

 if you want to save your work!

Page   of 

15

24

Original sample:

Copy into multiple slots (using Edit+Copy)

Use Edit+Scrub Start/End to create various slices

Sample

1

10

2

9

3

8

4

7

5

6

Sample

1

10

2

9

3

8

4

7

5

6

Sample

1

10

2

9

3

8

4

7

5

6

Sample

1

10

2

9

3

8

4

7

5

6

PLAY

Copy

Copy

Edit

Sample

Edit

Sample

Edit

Sample

Length

Start Pos.

Scrub Start

Scrub End

Scrub Start

Scrub End

Содержание STS

























Отзывы: