3Z TELECOM Antenna W.A.S.P., Руководство пользователя

Страница: 30 / 59

30
Step 9 - Wait for Antenna WASP Sensors to Connect
Once each of the Antenna WASP sensors are configured in the Data Collector, the
management software will display an icon in the right pane and a row in the summary
table for each WASP sensor.
Note: A grey icon next to each antenna WASP sensor indicates that the sensor
has not yet wirelessly connected to the Data Collector.
Before continuing to the next step, each of the antenna WASP sensors must
connect to the Data Collector and report position information.
When the sensors
are connected, the status information will appear with a green icon next to each
Antenna WASP similar to the image below.
IMPORTANT:
You must press the refresh button or configure automatic refresh
(as described in the section titled Automatic Refresh Setting on page 55) in
order to see changes in the Data Collector Manager window.
Once each of the Antenna WASPs has reported to the Data Collector Manager software
at least once, you may proceed to
Step 10
– Install Antenna WASPs on the
.