3Z TELECOM Antenna W.A.S.P., Руководство пользователя, Страница: 31 / 59

31
Step 10
– Install Antenna WASPs on the Antennas
IMPORTANT: Ensure that you have successfully completed steps 1 through 9
and have verified that each Antenna WASP is reporting to the Data Collector
before installing any Antenna WASPs on the tower.
The following steps must be followed precisely to ensure the Antenna WASPs are
securely fastened onto the antennas.
1.
Clean the area where the Antenna WASP is to be mounted with a rag and clean
water.
2. Dry the area with a dry cloth and use the supplied alcohol pad to remove excess
debris, to ensure sufficient adhesion
3.
Allow the entire area to dry completely.
4.
Remove plastic on the back of the Remote WASP to expose adhesive as shown
below.