3Z TELECOM Antenna W.A.S.P., Руководство пользователя

Страница: 46 / 59

46
Antenna WASP Settings
Once you have connected to a Data Collector, as described in the section titled
Connecting to a Data Collector on page 37, you can edit the settings for a specific
antenna WASP sensor by following these steps:
1. Click on the icon for the WASP sensor in the left pane.
2. Click on
the ‘Settings’ tab in the right pane.
The settings for the WASP sensor will appear in the right pane similar to the following:
Antenna WASP Identification
The identification of each WASP sensor is broken into two fields.

Sector Name
– indicates the sector (azimuth) of the cellular antenna on which
the WASP sensor is installed.

Antenna Name
– uniquely identifies which antenna the sensor is installed on
within the current sector.
Target Orientation
Each WASP sensor must be configured with the ideal 3D orientation for the cellular
antenna on which the sensor is installed. Each of the three fields (azimuth, tilt, and roll)
specify this ideal orientation. For more information on these 3D orientation fields please
refer to the section titled
3-D Orientation (Azimuth, Tilt, and Roll) on page 10.