3Z TELECOM Antenna W.A.S.P., Руководство пользователя

Страница: 40 / 59

40
Site Name Setting
Each antenna WASP installation can be given a unique site name to distinguish a
particular site from other installations. This name will appear in the left pane of the
software when connecting and will be also visible through SNMP.
Location Setting
Each antenna WASP installation can be optionally configured with the GPS latitude and
longitude of the installation site. If this information is not known, simply enter
‘0’ in each
field.
Alarm Settings
The alarm settings page allows the user to configure the thresholds for several
measured parameters which define when the Data Collector generates an alarm
condition. The following describes each setting in detail:

Maximum
Δ
Azimuth, Tilt, Roll - Each of these settings specifies how much
change in position from the commissioned target orientation is allowed before
generating an alarm. Each axis of rotation can be independently specified in
degrees.

Maximum Report Interval
– This field specifies the maximum acceptable
amount of time between each sensor data report from an antenna WASP sensor
(in hours). If unsure, leave this setting at the default value of 2 hours.