USER MANUAL|
VX-2S-CPIR-W
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
78
Exposure Settings
If the camera is equipped with a fixed lens, only Manual is selectable, and the iris mode is not
configurable.
If Auto is selected, you can set the auto iris level from 0 to 100.
The Exposure Time refers to the electronic shutter time, which ranges from 1 to 1/100,000s.
Adjust it according to actual luminance conditions.
Image Gain can also be manually configured from 0 to 100. The bigger the value, the brighter
the image however, noise would also be amplified to a larger extent.
Figure 11-2
Exposure Settings
Day/Night Switch
Select the Day/Night Switch mode according to your surveillance environment. Day, Night, Auto,
Scheduled-Switch, and Triggered by alarm input are selectable for day/night switch.
Figure 11-3
Day/Night Switch
Day:
Enable Day mode.
Night:
Enable Night mode.
Auto:
The camera switches between day mode and night mode automatically
depending on environment illumination. The sensitivity ranges from 0 to 7. The higher
the value is, the easier the mode switches. The filtering time refers to the interval time
between the day/night switch. You can set it from 5s to 120s.
Scheduled-Switch:
Set the start time and the end time to define the duration for
day/night mode.
Triggered by alarm input:
The switch is triggered by alarm input. You can set the
triggered mode to day or night.
Smart Supplement Light:
Set the supplement light as ON, and Auto and Manual are
selectable for light mode.
►
Auto:
The supplemental light changes according to the actual luminance. E.g., if
the current scene is bright enough, then the supplemental light adjusts itself to
lower power; and if the scene is not bright enough, the light adjusts itself to higher