USER MANUAL|
VX-2S-CPIR-W
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
41
A user can call a preset at any time to shift position to the desired preset coordinates.
In the PTZ control panel, select a defined preset from the list and click
to call the preset.
Alternatively, select the Presets interface, and call the preset by manually typing the preset No.
Figure 7-5
Calling a Preset
SETTING/CALLING A PATROL
NOTE:
No less than 2 presets must be configured before you set a patrol.
Steps:
1.
Click
to enter the patrol configuration interface.
2.
Select a path No., and click
to add the configured presets.
3.
Select the preset, and input the patrol duration and patrol speed.
4.
Click OK to save the first preset.
5.
Follow the steps above to add the other presets.
Figure 7-6
Add Patrol Path
6.
Click OK to save a patrol.
7.
Click
to start the patrol, and click
to stop it.
8.
(Optional) Click
to delete a patrol.