VISIX Stereoscopic People Counting Camera | Quick Start Guide |
VX-VSS-20
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
11
CONFIGURATION FOR MULTIPLE CAMERAS
1.
Repeat the configuration process for each camera following the steps outlined in the previous section.
2.
Move each camera’s detection line and connect the ends of adjacent lines. Some objects could be placed
on the image border for reference. See picture below:
Figure 4-5
Configuration of each detection line
4.3
Saving the Camera to VIGIL Server
After configuring the camera’s people counting rule and testing
its accuracy, the camera can be saved to VIGIL
Server. To save the camera to VIGIL Server:
1.
Return to the 3xLOGIC Camera (VISIX IP) Setup Utility interface (pictured in Section 4.1).
2.
Click on
Detect Online Devices/ Change IP Address
to proceed to the Online Devices window.
3.
Select the VX-VSS-20 configured in the previous section from the list of detected devices. Click
Save to
VIGIL
. .
Figure 4-6
Saving Camera Settings to VIGIL
4.
You will be prompted to choose the camera channel, video codec and recording FPS values Select the
desired settings and camera channel and click
OK
to save the camera to VIGIL Server.