3Ware 720-0127-02 Скачать руководство пользователя страница 115

Страница: 115 / 122

Sched Commands

www.3ware.com

107

sched verify

cid

remove

slot_id

This command removes (or unregisters) the verify background task in slot

slot_id

For example:

//localhost> tw_cli sched verify c1 remove 3

Removes the verify background task in slot 3.

Warning:

If all timeslots are removed, be sure to also disable the

schedule. Otherwise the applicable background task will never
occur.

sched verify

cid

enable

This command enables all verify background tasks on controller

cid

Note:

When enabling the verify schedule you must also remember to also

enable the autoverify setting for the arrays to be verified. For details, see “set
autoverify cid uid on|off” on page 112.

sched verify

cid

disable

This command disables all verify background tasks on controller

cid

sched selftest

cid

This command displays the current selftest background task as illustrated
below.

//localhost> tw_cli sched selftest c1

Selftest Schedule for controller /c1

========================================================

Slot Day Hour UDMA SMART

--------------------------------------------------------

0 Sun 12:00am enabled enabled

1 Mon 12:00am enabled enabled

2 Tue 12:00am enabled enabled

3 Wed 12:00am enabled enabled

4 Thu 12:00am enabled enabled

5 Fri 12:00am enabled enabled

6 Sat 12:00am enabled enabled

Содержание 720-0127-02



























































































































Результаты поиска

Содержание 720-0127-02

Отзывы:

3Ware 720-0127-02, Руководство пользователя, Страница: 115 / 122

Результаты поиска

Содержание 720-0127-02

Отзывы: