3Ware 3WARE 9650SE, Руководство по установке

Страница: 24 / 42

Chapter 2. Installing Your 3ware RAID Controller
20 3ware 9650SE Serial ATA RAID Controller Installation Guide
4 (Optional) Connect the drive activity LED connectors. For
details, see page 20.
5 Turn to “Check Installation and Close the Case” on page 25.
Step 4. Connecting Drive Activity LED
Indicators (Optional)
Connecting drive activity LED indicators is optional. For a
discussion of whether to make these connections, see “Deciding
Whether to Use the LED Status Connector” on page 11.
Figure 14 through Figure 18 show the location of LED indicators
on the different 9650SE controllers.
Additional detail about these connectors starts on page 23.
Figure 14. 2-Port 3ware 9650SE-2LP Serial ATA RAID Controller
LED indicators for individual
drives on J7: 0 and 1 (left to
right)
Overall LED drive status indicator:
the last two pins of J7. The anode
is the lower of the two pins and
the cathode is the upper.