N8072
Cube Network Camera
2 Meg H.264
- 75 -
Trigger
Whenever the camera detected abnormal events during the scheduled time, it will
respond by active trigger automatically.
There are 2 types for the trigger response: Alarm messages sending and emailing.
Recorded the image to the specify server.
Once you had completed this setting, you may requested to test by manually in this
section to ensure all of the functions are working properly.
Normal Open
has been set to the default status of the digital input pin, but you can
change it to
Normal Ground
by setting in
Setting > Application > Event > Trigger
.
1. It will be
Open
status of the alarm input pin which is connected to external device when
the alarm input has been set to
Normal Open
. Therefore, when the external device is
triggered to close status, the alarm input pin will be triggered.
2. On the contrary, It will be
Close
status of the alarm input in which is connected to
external device when the alarm input pin has been set to
Normal Grounded
.
Therefore, when the external device is triggered to open status, the alarm input pin will
be triggered.
NOTE
:
Before you install the hardware for alarm I/O, please set up the
Trigger Setting
at first.
(
Setting > Application Setting > Event > Trigger
)
Содержание n8072
