Configuration
3M™ Wireless Communication System Model XT-1
Installation Manual
May 2008 – Revision 1.3
Page 35 of 62
To change the vehicle alert volume:
1.
Enter the configuration mode, see page 31.
2.
Select a new value for
01 Drivethru Volume
>
Vehicle Alert
Volume
. The range is 0 (silent) to 20 (maximum).
Outbound Greeter Message Volume
Changing the outbound greeter message volume affects the sound volume of the
custom greeting messages and the system internal greetings (“Store Closed” and
“Please Pull Ahead”).
To turn up or down the greeter message volume:
1.
Enter the configuration mode, see page 31.
2.
Select a new value for
01 Drivethru Volume
>
Greeter Message
Volume
. The range is 0 (silent) to 20 (maximum).
Change the Monitor Volume
The monitor is an additional speaker that can be used to monitor drive thru
communication without a headset, typically in the kitchen. If the monitor has a
volume control built into it, you can use it to control the overall volume level of
the speaker. To be more specific about which elements you want to control,
follow the instructions in the following sections.
Inbound Listen
Changing the inbound listen volume affects how loudly the monitor plays the
inbound (customer order point) communication. You can also disable the
monitor playing inbound sounds.
To change the inbound listen monitoring settings:
1.
Enter the configuration mode, see page 31.
2.
Select
02 Monitor Volume
.
3.
To enable or disable the monitor playing the inbound sounds, change
the value for
Inbound Listen: Enable
to
ON
or
OFF
.
4.
To change the volume level, select a new value for
Inbound Listen:
Volume
. The range is 0 (silent) to 20 (maximum).
Outbound Talk
Changing the outbound talk volume affects how loudly the monitor plays the
outbound (order taker) communication. You can also disable the monitor
playing outbound talk.
Note:
To avoid feedback and echo, set the outbound talk volume as low as possible.
To change the outbound talk monitoring settings:
1.
Enter the configuration mode, see page 31.
2.
Select
02 Monitor Volume
.
3.
To enable or disable the monitor playing the outbound talk, change the
value for
Outbound Talk: Enable
to
ON
or
OFF
.
4.
To change the volume level, select a new value for
Outbound Talk:
Volume
. The range is 0 (silent) to 20 (maximum).
