Configuration
May 2008 – Revision 1.3
Page 34 of 62
3M™ Wireless Communication System Model XT-1
Installation Manual
To find out your user password:
1.
Enter the configuration mode (see page 31).
2.
Select
13 Change Passcodes
>
Change User Passcodes
.
3.
Look at the passcode following your user number (e.g., “User 5.”)
To log into the base station:
•
Using a web browser, type in the IP address of the base station in the
browser’s Address bar, then press
Enter
.
•
Type in your user name and password. Do NOT type the space
between User and the user number (e.g., type “User5” instead of
“User 5”).
Notes:
The default user name is “User1”; the password is 1234.
Change Basic Volume Settings
Note:
All volume settings should be adjusted during normal or peak business hours.
Adjusting them during slow times will likely produce volume settings that are
too low.
Note:
Inbound and outbound are always defined from the perspective of the headset.
Inbound Microphone Volume
Changing the inbound microphone volume affects the sound volume coming
from the customer order point microphone.
To turn up or down the inbound microphone:
1.
Enter the configuration mode, see page 31.
2.
Select a new value for
01 Drivethru Volume
>
Inbound Mic
Volume
. The range is 0 (silent) to 20 (maximum).
Outbound Talk Volume
Changing the outbound talk volume affects the volume of the speaker at the
customer order point.
Note:
To avoid feedback, set the outbound talk volume as low as possible.
To change the outbound talk volume:
1.
Enter the configuration mode, see page 31.
2.
Select a new value for
01 Drivethru Volume
>
Outbound Talk
Volume
. The range is 0 (silent) to 20 (maximum).
Vehicle Alert Volume
Changing the vehicle alert volume affects the volume of the vehicle alert signal
on the headsets.
