Configuration
May 2008 – Revision 1.3
Page 32 of 62
3M™ Wireless Communication System Model XT-1
Installation Manual
Buttons
Following is a brief description of the buttons on the display and their functions.
Directional arrow
(
XWTS
) buttons
You can use these buttons to scroll around
when navigating the menus. When you are
editing information, the up and right arrows
scroll “up” (increment) and the down and left
arrows scroll “down” (decrement) list of
values.
Number/letter (
0
–
9
)
buttons
You can use these buttons to specify exact
numbers or letters in fields that permit them.
Each time you press button, the result
changes to the next available number or
letter. For instance, pressing the 7 button
three times creates a letter “t” (7-s-t). See
Service
button below for creating upper-case
letters.
Mode
(Exit)
button
In run mode, you must press and hold
Mode
while entering your passcode to enter user or
installation service.
In user and installation service modes, use
the
Mode
button to exit from a current field
that you are editing without saving any
changes or to go upward (backward) in the
configuration menus.
Enter (Select)
buttons
(both buttons perform the
exact same functions)
Use the
Enter
button to execute the current
selection:
Pressing
Enter
on a menu opens the menu
and shows you its submenu items.
Pressing
Enter
on an editable field switches
you to edit mode so you can change the value
in the field using the arrows and
number/letter buttons where applicable.
Pressing
Enter
while in edit mode saves the
changes you have made and exits edit mode.
