![background image](http://html1.mh-extra.com/html/3m/straight-line-laminator-single-head/straight-line-laminator-single-head_assembly-and-operation-instructions-manual_3180885022.webp)
Page 22
3M
™
Straight Line Laminator Single Head Manual
|
Original Assembly and Operation Instructions
Effective: August 2022
6.0 Operation
6.1 Initial Operation
The initial operation is carried out by personnel of 3M .
NOTE:
Before commissioning by the customer or handover to production, the system
must receive a final inspection and be checked for safety and released by the customer .
CAUTION:
To reduce the risks associated with pinching which, if not avoided, could
result in minor or moderate injury:- Keep hands, hair, loose clothing, and jewelry away
from rollers and spring . Always position body as instructed per user instructions .
6.2 Standard Setting Compression Spring
It is generally recommended to carry out the application work with the standard setting (Figure 15B,
second mounting position from below) of the compression spring .
NOTE:
Excessive pressure during application leads to stretching of the tape and possibly
to faulty production .
The mounting position of the compression spring in the base plate should only be changed in exceptional
cases . There are seven mounting positions . (Figure 14A) .
Figure 14
NOTE:
Adjustment and maintenance work on the compression spring should only be
carried out by instructed persons or qualified personnel .
A
B