![background image](http://html1.mh-extra.com/html/3m/straight-line-laminator-single-head/straight-line-laminator-single-head_assembly-and-operation-instructions-manual_3180885011.webp)
Page 11
3M
™
Straight Line Laminator Single Head Manual
|
Original Assembly and Operation Instructions
Effective: August 2022
3.0 Safety Devices
3.1 Type Plate
3.1.1 General Information
The type plates are located at defined locations and must not be removed or covered .
If parts of the system are replaced, it must be ensured that type plates located there are placed
back on the new parts .
3.1.2 Type Plate Continuous Laminator
The type plate is located at the front of the base plate . The registered serial number can be
found on the attached type plate .
Figure 1
4.0 Design and Functions
4.1 Technical Data
Dimensions L x W x H approx .
(in the standard setting and without adhesive tape roll)
385mm x 512mm x 240mm
385mm x 512mm x 266mm
385mm x 512mm x 290mm
Dimensions L x W x H approx .
1008mm x 596mm x 100mm
Max . Roll Ø
500mm
Inner Ø
75mm (3 in .)
Made in Germany
Type:
Straight Line Laminator Single Head
Serial No.: XX-XXX
Vulkan Technic
GmbH
Vulkanstrasse 1
D-54578 Wiesbaum
www.vulkantechnic.de