![background image](http://html1.mh-extra.com/html/3m/straight-line-laminator-single-head/straight-line-laminator-single-head_assembly-and-operation-instructions-manual_3180885035.webp)
Page 35
3M
™
Straight Line Laminator Single Head Manual
|
Original Assembly and Operation Instructions
Effective: August 2022
9.1.2 Maintenance and Replacement of the Adjustable Deflection Pulley
Figure 34
1 . To replace the adjustable deflection pulley (Figure 34A) remove the retaining ring (Figure 34E) .
This allows you to pull off the complete deflection pulley (Figure 34B, Figure 34C, Figure 34D) .
2 . For cleaning work it is sufficient to turn the locking washer (Figure 34D) and the adjustable sleeve
(Figure 34C) off the base element (Figure 34B) in assembled state and clean the affected areas .
3 . Assembly takes place in reverse order .
9.1.3 Maintenance and Replacement of the Downholder
Figure 35
1 . To work on the downholder, first remove the application roller, see chapter
10.1.4 Maintenance and
Replacement of the Application Toller
.
2 . To replace the downholder (Figure 35A) remove the retaining ring (Figure 35D) .
3 . Now you can pull the bearing sleeve (Figure 35C) off the downholder axle (Figure 35B) .
4 . Assembly takes place in reverse order .
5 . To replace the compression spring (Figure 35E) remove the two bolts M2 .5, DIN EN ISO 4762,
Allen key size 2 (Figure 35F) .
6 . Pull the spring holder (Figure 35G) off the swivel lever and take the compression spring out of the
locating bore (Figure 35E) .
7 . Put a new compression spring in the locating bore of the spring holder (Figure 35G) .
8 . Assembly takes place in reverse order .
A
A
D
B
C
E
B
C
D
G
E
F