3M SP-DL-1, Руководство пользователя

Страница: 88 / 168

75 Back-erasing
Stopping a session
Models SE and DL
Stopping a session
You can stop the session manually or with a trigger command, but only when
the instrument is in the Pause state. When the session is stopped, the Stop
icon , appears in the Status Area and the RunTime clock is zeroed. For
information about using triggers, see “Digital Outputs/Triggers” on page 50.
Stopping a session is sometimes referred to as “closing the session.”
Conversely, a session is often described as “open” when the instrument is
either in a run or pause state.
Stopping and pausing
A manual session stop is a little different from a study pause. To
pause a
study,
, you simply press the
Run/Pause
key and the command is immediately
executed. To
stop a session,
, however, you need to press and hold the
Stop
key
.
If you don’t press and hold the stop key for the 3-second countdown period, the
stop command is ignored and the session remains open. If you hold throughout
the countdown, the following events occur in proper sequence.
Figure 5-15: Stopping and pausing
• Stopped
- The session is stopped.
• Transferred
- The session data in memory is transferred to the memory
card.
•
Cleared
- The instrument’s memory is cleared of session data.
•
Zeroed
- The RunTime clock is cleared to zero.
Stop icon
Stop key
Run/Pause key