3M SP-DL-1, Руководство пользователя

Страница: 62 / 168

49 Locking setup or run mode
Disabling secure run or secure setup (unlocking)
Models SE and DL
4. To set
Secure Setup Mode
, ensure it is highlighted by pressing
Down
arrow. Once selected, press
Enter
and “
0000
” will appear. (See Figure
4-10 for a screen example.) (Also, you must be in stop mode.)
•
To select a numeric code, press
Up/Down
arrows to select a
number, press
Enter
to toggle between the fields.
•
Press
On/Off/Esc
repeatedly until the
Start
screen appears.
This will
Enable
the Secure Setup (or locking setup).
Figure 4-12: Secure/lock setup prompt
Disabling secure run or secure setup (unlocking)
You can disable Setup Mode security only when the session is stopped.

From Secure Run or Secure Setup screen
1. Both screens will have a Lock softkey (see Figures 4-11 or 4-12).
2. Press the
Lock
softkey and the code will appear (see Figure 4-10 for
example).
3. Enter in the code (using
Up/Down
arrows to change value and
Enter
to
move to next field).
4. Press
Enter
to exit the code field. Disabled will appear indicating the
lock feature is turned-off.
Secure code backup number
If you forget your own security code, you can enter “9157” in the template to
disable Secure Run Mode or Setup Mode Security.

From the Start screen
1. In the Start screen, press the
Lock
softkey. The Lock screen appears.
2. Follow Steps 2-4 above, “Setting secure run or secure setup”, page 47.
To unlock/unsecure
Press lock softkey and
then enter in code.