3M Protecta Rebel 3590518, Инструкция по эксплуатации

Страница: 10 / 28

10
;
Before using this equipment, record the product identification information from the ID label in the ‘Inspection and
Maintenance Log’ at the back of this manual.
DESCRIPTION:
Figure 2 identifies key components of the 3M™ DBI-SALA
®
Ultra-Lok Self-Retracting Devices (SRDs). Ultra-Lok SRDs are drum
wound Wire Rope Lifelines (A) which retract into a thermoplastic or aluminum Housing (B). They can hang from anchorage by a
Carabiner attached through the Swivel Eye (C) on the top of the SRD. A Self-Locking Snap Hook (D) on the end of the Lifeline
attaches to the designated Fall Arrest connection on a Full Body Harness. A Bumper (E), protects the Wire Rope and Ferrules
securing the Snap Hook from abrasion and corrosion.
Figure 1 defines the Ultra-Lok SRD models covered by this instruction manual. The following SRD Types are available:
• Self-Retracting Lanyard (Figure 2A): Self-Retracting Lanyards (SRLs) are suitable for applications where the lifeline
remains generally vertical during use and possible Free Fall is limited to 2 ft (0.6 m).
• Self-Retracting Lanyard with Leading Edge (Figure 2B): Self-Retracting Lanyards with Leading Edge (SRL-LEs) are
suitable for applications where the lifeline remains generally horizontally during use and possible Free Fall is limited to 5 ft
(1.5 m). SRL-LEs have an integral Energy Absorber (F), or similar component, to withstand impact loading of the lifeline
over a sharp or abrasive edge during fall arrest and minimize fall arrest forces on the user.
• Self-Retracting Lanyard with Rescue (Figure 2C): Self-Retracting Lanyards with Rescue (RSRLs) include an integral
means for assisted rescue by raising or lowering the rescue subject. SRL-Rs are equipped with a 3-Way Emergency
Retrieval Hand Crank (G). Some models include a Tripod Mounting Bracket (H) to mount the SRL-R on the leg of a Tripod for
Confined Space applications.
Table 1 – Specifications
Casing Halves Material
9 9511040 Aluminum - 50 ft (15 m) SRDs
9 9511071 Thermoplastic - 20 ft (6 m) and 33 ft (10 m) SRDs
9 9520022 Aluminum - 20 ft (6m) and 33 ft (10 m) SRDs
9 9520045 Thermoplastic - 50 ft (15m) and 33 ft (10 m) Leading Edge SRDs
9 9520047 Aluminum - 50 ft (15 m) SRDs
9 9520057 Thermoplastic - 66 ft (20 m), 85 ft (26 m), 100 ft (30 m), and 50 ft (15 m) Leading Edge SRDs
9 9520059 Aluminum - 66 ft (20 m), 85 ft (26 m), and 100 ft (30 m) SRDs
Lifeline Description Hook
9 2000178 7/32 in. (5.56 mm) galvanized steel wire rope, self locking alloy steel swiveling snap hook with indicator. 2000178
9 2000175 3/16 in. (4.76 mm) galvanized steel wire rope, self locking alloy steel swiveling snap hook with indicator. 2000175
9 2000175 3/16 in. (4.76 mm) stainless steel wire rope, self locking alloy steel swiveling snap hook with indicator. 2000175
9 2100044 3/16 in. (4.76 mm) stainless steel wire rope, self locking stainless steel swiveling snap hook with indicator. 2100044
Hook Description Material Gate Strength Throat Size
2000175 Swiveling Self-Locking Snap Hook with Impact Indicator Zinc Plated Steel 3,600 lbs (16 kN) .75 in (1.9 cm)
2000178 Swiveling Self-Locking Snap Hook with Impact Indicator Zinc Plated Steel 3,600 lbs (16 kN) .75 in (1.9 cm)
2100044 Swiveling Self-Locking Snap Hook with Impact Indicator Stainless Steel 3,600 lbs (16 kN) .75 in (1.9 cm)