![background image](http://html1.mh-extra.com/html/3m/multisync-p402-dst/multisync-p402-dst_user-manual_3255031031.webp)
3M™ MicroTouch™ Software MT 7 User Guide
31
3M Touch Systems, Inc. Proprietary Information – 25695K
CHAPTER 3
Windows® CE Overview
MT 7 Software, a member of the MicroTouch™ Software Suite, provides unified driver
support for MicroTouch touch technologies over a wide range of operating systems. This
version supports Microsoft® Windows® CE 6.0 R3
Intended for touch system integrators, MT 7 provides flexibility in defining how the
sensor affects the system. This product includes a Touch driver, a Control Panel, and a
Calibration Tool.
Installation Instructions
The Installer requires that Platform Builder be installed in your Windows® CE 6.0 R3
machine. The Installer puts the driver and control panel selected by user into the proper
Platform Builder directories.
If you downloaded the distribution, unzip the file into another directory.
•
Go to
www.3mtouch.com
and click Touchscreen Software located on the left-hand side
of the page.
•
On the Touch Screen Software page there are several tabs, click MT7 Drivers.
•
Choose CE from the dropdown menu under the heading Touchscreen Drivers, choose
CE.
•
This will bring you to a new page with a link saying Microtouch MT7.13, click it.
•
This will launch a series of windows. Save and unzip your files.
•
Clicking MT7forWINCE.msi will begin the installation process.
When running the Setup you will see a series of screens all with instructions on how to
proceed forward with the installation.
Note:
Hitting Cancel at any point will terminate the Setup and close the window.