3M
Multimedia Projector MP8620
Disassembly/Reassembly
3M 1999
2-8
2
1
3
3
4
4
5
6
7
2-3-5.
Remove Power Distributor
To avoid electrical shocks, unplug projector
power cord before performing any maintenance
to electrical components.
To avoid burns to fingers, allow projector lamp
and internal projector components to cool off prior
to lamp removal or disassembly.
Remove lamp assembly and power supply.
1.
Remove three (3) screws securing cover.
2.
Lift edge of cover toward front of machine first and
then remove.
3.
Disconnect three (3) cable connectors.
4.
Disconnect two (2) ribbon cables.
5.
Remove one (1) screw to disconnect ground.
6.
Disconnect two (2) ribbon cables.
7.
Remove two (2) screws (one on each side).
8.
Remove power distributor.
9.
Reassemble in reverse order.
!
Caution
!
WARNING
