LIGHTFALLS by 3M™ + Todd Bracher Installation Guide - Sconce, Rev. C, Feb. 2014
Page 5
Installation Guide LIGHTFALLS by 3M™ + Todd Bracher
Sconce
Installing the Product (cont.)
Assemble and Install the Lightfalls Fixture
The Product is intended for mounting on a flat planar surface, such as a
wall or ceiling. It may be mounted on various hard surfaces including
cement and drywall. The accompanying figures depict one suggested ori-
entation.
1. Choose the location and orientation for the Lightfalls Sconce.
2. Mark the positions for the sconce bracket anchor point/screw
locations.
3. Mark the position for the thick panel bushing location for wire routing.
4. Install drywall/concrete anchors as applicable and the thick panel
bushing (See Figure 2).
5. Install the Sconce Bracket to the anchor points with customer supplied
screws (See Figure 3).
Figure 2: Anchor and Bushing Installation
Thick Panel Bushing
Customer Supplied
Anchors
Figure 3: Sconce Bracket Installation
Customer Supplied
#6 Screws
Screw Caps
Sconce Bracket
