Page 4
LIGHTFALLS by 3M™ + Todd Bracher Installation Guide - Sconce, Rev. C, Feb. 2014
Installation Guide LIGHTFALLS by 3M™ + Todd Bracher
Sconce
Installing the Product (cont.)
Install Power Unit
•
Mount the power unit in the desired location in wall or ceiling.
•
Wire cabling to the power unit as shown in Figure 1.
Install Junction Box (optional)
•
Mount the junction box in the desired location.
•
For ceiling mounts, mount the junction box above the power drop. A cosmetic junction box cover is customer supplied.
Use provided harness to
connect to LED assembly
LED
Assembly
Plug
Recpt
LED
Assembly
Plug
Recpt
AC_L
AC_N
To additional supplies
on same dimmer switch
To additional supplies
on same dimmer switch
Dimmer Relay
(such as Lutron
PP-120H or
PP-277H
depending on
installation)
Dim–
Dim+
Dim–
LED+
LED–
ACL
ACN
Dim+
0–10V Dimmer
(such as Lutron
DIVA 0–10V
dimmer)
LED Driver
LPF-16D-36
Junction Box
(Optional)
Wire Nut
Figure 1: LF1 and LF-L3 Wiring Diagram
