3M GMI PS200-LMP, Руководство по эксплуатации и техническому обслуживанию, Страница: 15 / 46

64220, Rev. 1/April 2019
3M™ GMI™ PS200-LMP AUTO BUMP/CALIBRATION STATION
CONNECTIONS
3-3
Figure 3-4: Connecting Tubing to a Barbed Fitting
5. Gas 1:
Insert the barbed adapter from the combi cylinder into the ‘Gas 1’ inlet on the ABC, as illus-
trated in
Figure 3-5: Connect Tubing to ‘Gas 1’ Inlet of ABC
.
Figure 3-5: Connect Tubing to ‘Gas 1’ Inlet of ABC
Gas 2:
Insert the barbed adapter from the methane only cylinder into the ‘Gas 2’ inlet on the ABC.
6. To remove an adapter from the ABC, depress the yellow-colored collar to release, then withdraw
adapter.
CAUTION: When connecting the tubing to either the on-demand flow regulator or the
barbed adapter, ensure the tubing fully connects to, and extends past, the
last barb, as illustrated in
Figure 3-4: Connecting Tubing to a Barbed Fitting
.