3M Dynatel 1420-iD Скачать руководство пользователя страница 22

Страница: 22 / 28

78-8130-6741-6 Rev G

B. Write History [SK]

Menu [6] + Data Templat [SK:2] + Write History [SK:2b]

•

Select the 3M™ Marker data to be viewed by

pressing the up/down arrows [SK].

•

Press

Write Details

[SK] to view all data that was

sent to the marker.

•

Press

Write History

[SK] to return to the list of

written data.

•

Press

Exit

[SK] to return to Data/Template review

display.

For additional information concerning writing to 3M

™

iD Markers, refer to

www.3M.com/dynatel

Instruction Manual M-Series Locator PC Tools.

9. GPS Compatibility Operation

A. Communicating with the GPS Device

Menu [6] + COM Setup [SK:3]

The

COM Setup

[SK:3] key will toggle through several options to configure the

Serial

Port

[14] of the locator (depending on the application, or capabilities of the GPS device).

Select from the following options.

NMEA

– The Serial Port is configured to receive NMEA signals from a GPS device

(4800 Baud Rate). (Capture Mode/Mode 1)

GIS

– The Serial Port is configured to send and receive data to a GPS device that has

GIS mapping capabilities. (Capture/Transmit Mode/ Mode2)

– The Serial Port is configured to communicate with a computer for the Dynatel PC

Tool Kit application.

PDA

- The Serial Port is configured to only send information if the GPS device only has

the ability to receive information.

TRSync

- Serial Port is configured in PDA mode but the data is transmitted in an

abbreviated .CSV (Comma Separated Value) format.

B. Capturing the GPS Coordinates (Capture Mode / Mode 1)

Menu [6] + COM Setup [SK:3] + NMEA

If the GPS device is not configured properly, there is an error communicating with the

locator, or the GPS has not acquired enough satellites to pinpoint the location, the locator

will display the message “Insert External Device”.

Содержание Dynatel 1420-iD





























Результаты поиска

Содержание Dynatel 1420-iD

Отзывы:

Похожие инструкции для Dynatel 1420-iD

Бренды по названию

Популярные бренды

3M Dynatel 1420-iD, Руководство оператора

Результаты поиска

Содержание Dynatel 1420-iD

Отзывы:

Похожие инструкции для Dynatel 1420-iD

Бренды по названию

Популярные бренды