manualshive.com logo in svg

3M Dynatel 1420-iD, Руководство оператора

Поделиться
Скачать
3M Dynatel 1420-iD Скачать руководство пользователя страница 24

 24 

78-8130-6741-6 Rev G

PC Tools.  Selecting this link will display the latest software downloads as well as any 

Release Notes related to the current software release.
Once downloaded to your PC, double click the file and an auto-installer will install the 

C Tool desktop software. Double click the 3M™ Dynatel™ PC Tool Kit icon on the 

desktop. Using the provided RS232 cable, or RS232-to-USB adapter cable, connect the 

Serial Port [14] on the locator to the PC and power the locator on. Click the Upgrade 

Software button in PC Tools to begin upgrade. Do not disconnect or power off the 

locator while the upgrade is in progress. Wait until the software indicates that the 

installation was successful. This will take approximately 6 to 7 minutes to complete.
The 

Dynatel PC Tool Kit

 provides the user an excellent interface between the locator and 

a PC. This software utility provides the tools by which the user can:

• 

Upgrade the locator to the latest software revision.

• 

Program one or multiple locators to best suit specific user configurations.

• 

Load an alternate language into the locator.

• 

Utilize the 3M

™

 iD Marker utility to:

 

−

Create templates for writing data to iD markers, or create Trace Templates for 

GPS path tracing when connected to a GPS device.

 

−

Download iD marker data that has been written or read by the locator for 

documentation databases.

Embedded in the desktop software is the most current software for the locator, which 

affords the user the option of upgrading the unit without returning the unit to the 

3M Service and Repair Center.
Please refer to the operating instructions included with the software.

12. Self Test Of 3M Dynatel™ Electronic Marking 

System (EMS) Marker Locator

Menu [6] + >>More [SK:4] + Self Test [SK:7]

This operation performs a self-test on the locator.
The locator will display current information about the unit (model number, serial 

number, software revision, and hardware revision).
1.  Press 

Run 

[SK] to start the self test.

 

−

A status bar will appear while the self test is running.

 

−

Results will appear on the display when the test is complete.

 

−

Press Exit [SK] to return to the Menu.

Содержание Dynatel 1420-iD





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды