Table 2 –
Inspection and Maintenance Log
Model Number (Serial Number):
Date Purchased:
Date of First Use:
···
;
This product must be inspected by the user before each use. Additionally, a Competent Person other than the user must
inspect this equipment at least once each year.
···
Component
Inspection Procedure
Inspection Result
Pass
Fail
Web Lanyards (Figure 14)
Inspect the webbing for Cuts (A), Frays (B), broken fibers, tears, abrasion,
Heavy Soiling (C), mold, Burns (D), and discoloration. Inspect the lanyard
stitching for pulled or cut stitches, since broken stitches may indicate that
the product has been impact-loaded and must be removed from service.
Connectors
(Figure 15)
Inspect all connectors for signs of damage and corrosion. Verify that all
connectors are working properly. Where present: Gates (A) should open,
close, lock, and unlock properly; Swivel Eyes (B) should rotate without
interference; and locking buttons and pins should function correctly.
Energy Absorber (Figure 16)
Verify that the integral energy absorber has not been activated. There
should be no webbing pulled out of the Cover (A). The cover should be
secure and free of Tears (B) or other damage.
Labels (Figure 13)
All labels are present and fully legible.
Fall Protection Equipment
Additional Fall Protection equipment that is used with the product is
installed and inspected per the manufacturer instructions.
···
;
If the product fails an inspection procedure, then the product fails overall inspection. If the product fails inspection, remove
it from service immediately. Clearly tag the product “DO NOT USE”. See Section 5 for more information.
···
Inspection Type:
User
Competent Person
Overall Inspection Result:
Pass
Fail
Inspected By:
Date of Inspection:
Signature:
Next Inspection Due:
···
Additional Notes:
Содержание DBI-SALA 1246518
Страница 17: ...17 Figure 13 Product Labels G 1 2 F 1 2 ...
