3M DBI-SALA 1246518, Руководство пользователя

Страница: 4 / 20

4
;
Before using this equipment, record the product identification information from the ID label in the ‘Inspection and
Maintenance Log’ at the back of this manual.
Table 1 – Product Specifications
System Specifications:
Anchorage: Anchorage structure requirements vary with the system application and whether it is a certified
anchorage or non-certified anchorage. The anchorage structure must sustain static loads applied in
the directions permitted by the anchorage connector.
System Application Certified Anchorage Non-Certified Anchorage Defined by
Fall Arrest 2 times maximum
arresting force
5,000 lbf (22.2 kN) OSHA, ANSI
Restraint 2 times foreseeable force
1,000 lbf (4.4 kN) per ANSI
5,000 lbf (22.2 kN) per OSHA
OSHA, ANSI
Work Positioning 2 times foreseeable force 3,000 lbf (13.3 kN) OSHA, ANSI
Rescue 5 times applied load 3,000 lbf (13.3 kN) ANSI
When more than one system is attached to an anchorage, the strengths stated above must be
multiplied by the number of systems attached to the anchorage. See ANSI Z359.2 for more
information.
;
Anchorage must be approved by a Qualified Person.
Standards: Each product model is certified to, or conforms with, the applicable standards and regulations listed
within Figure 1. If none are specified, then all standards and regulations listed on the cover apply.
Component Specifications:
Figure 3
Reference
Component Materials
A Anchoring Connector (see Connector Specifications)
B Harness Connector (see Connector Specifications)
C Energy Absorber Tear Web: Vectran polyester
Connector Specifications:
Figure 1
Reference
Model Number Description Material Gate Opening Gate Strength
C1 9502116 Snap hook Zinc-plated steel alloy 3/4 in. (19 mm) 3,600 lbf (16 kN)
C2 2000210 Rebar hook Zinc-plated steel alloy 2.5 in. (63.5 mm) 3,600 lbf (16 kN)
C3 2000209 Rebar hook
Aluminum alloy and zinc-plated
steel alloy
2.5 in. (63.5 mm) 3,600 lbf (16 kN)
C4 2000125 Rebar hook Zinc-plated steel alloy 3.0 in. (76.2 mm) 3,600 lbf (16 kN)
C5 9505254 Snap hook
Aluminum alloy and zinc-plated
steel alloy
3/4 in. (19 mm) 3,600 lbf (16 kN)
C6 2000194 Rebar hook Zinc-plated steel alloy 4.3 in. (109 mm) 3,600 lbf (16 kN)
CL 9501538 Choker loop Kevlar nomex webbing --- ---
;
Tensile Strength: The tensile strength of each of the connectors listed above is 22.2 kN (5,000 lbf).
C1 C2 C3 C4 C5 C6