background image

10 

 

 

 

        CRT Touch Monitor User Guide 

 

  WARNING 

To avoid the risk of fire which could result in serious injury or 
death: 

• 

Do not remove the cover or back of the monitor.  

To avoid the risk of electric shock which could result in serious 
injury or death: 

• 

Do not use a power cord that is frayed or otherwise damaged. 

 

 CAUTION 

To avoid the risk of electric shock which may result in minor or 
moderate injury: 

• 

Do not service the monitor. 

• 

There are no user serviceable parts inside. 

• 

Refer all servicing to qualified service personnel. 

• 

The anode cap output is at high voltage. 

• 

Do not use non-conforming replacement parts. 

• 

Do not place wet or damp objects on the monitor. 

• 

Do not expose the monitor to rain or other sources of water, steam, or 
moisture. 

• 

Do not place foreign objects on the monitor or its cables. 

• 

Do not remove the cover or back of the monitor. 

To avoid the risk of glass breakage which may result in minor or 
moderate injury: 

• 

Handle the monitor with care to avoid breaking the touch screen 
sensor.  The display contains glass parts.  Dropping the display may 
cause the glass parts to break. 

• 

Do not place foreign objects on the monitor. 

To avoid the potentially hazardous situations associated with the use 
of alcohol which may result in minor or moderate injury or property 
damage: 

• 

Follow all instructions and recommendations in the manufacturer's 
Material Safety Data Sheet and product label. 

To avoid possible environmental contamination which may result in 
minor or moderate injury: 

• 

Dispose of the monitor according to applicable governmental 
regulations.

 

Содержание CRT Touch Monitor































Отзывы: