background image

Chapter 2  Video Display Options 

23 

• 

MENU – Shows or hides the menu. 

• 

SELECT -- Highlights the current menu option or saves the current 
setting.  Press 

 or 

 to change the value. 

• 

/Down -- Enables you to scroll backwards through items on the menu 

-- decrease the value of selected option or move to the previous menu 
item. 

• 

/

Up -- Enables you to scroll forward through items on the menu -- 

increase the value of selected option or move to the next menu item. 

If you do not press the Menu, Select, or 

/up or 

/down adjust 

buttons for a user-defined time, the monitor adjustment program 
times out and hides the menu options.  You can specify this time out 
duration through the OSD controls.  You can press the Menu button 
at any time to display the options again. 

15" and 17" OSD Menu 1 

 

Icon  Description 

 

H POSITION (Horizontal Position) 
Moves images horizontally on screen left (

) or right (

). 

 

H SIZE (Horizontal Size) 
Increases (

) or decreases (

) size of image horizontally. 

 

V POSITION (Vertical position) 
Moves images vertically on screen up (

) or down (

). 

 

V SIZE (Vertical Size) 
Increases (

) or decreases (

) size of image vertically. 

 

PINCUSHION 
Adjusts the side pincushion or barrelling. 

Содержание CRT Touch Monitor































Отзывы: