background image

REPLACEMENT PARTS

AP141T

AP101T

AP11T

O-Ring

63597-174C

Clear Housing

68592-31

AP420 Cartridge

Standard

Sediment/Rust

Scale

AP110 Cartridge

Fine Sediment/Rust

Valve-In Head

Head Assembly

69815-01

Pressure Relief

Head Assembly

69814-01

AP102T

Valve-In Head

Head Assembly

69815-01

AP110 Cartridge

Fine Sediment/Rust

AP124 Cartridge

Heavy Sediment/Rust

Clear Housing

68758-31

O-Ring

63597-174C

Center Post

69817-31C

  Model  Cartridge(s) Used 

Function 

Service Flow Rate 

Max. Pressure 

Max. Temp

  AP101T 

AP110 

Particulate Reduction 

8 gpm (30.3 lpm) 

125 psi (862 kPa)  100°F (37.8°C)

  AP102T 

AP110-2 

Particulate Reduction 

16 gpm (60.6 lpm)  125 psi (862 kPa)  100°F (37.8°C)

  AP141T 

AP420 

Scale Inhibitor, 

10 gpm (37.9 lpm)  125 psi (862 kPa)  100°F (37.8°C) 

 

 

 

Particulate Reduction

  AP11T 

AP110 

Particulate Reduction 

8 gpm (30.3 lpm) 

125 psi (862 kPa)  100°F (37.8°C)

Limited Warranty: 

3M Purification Inc. warrants AP11T,

 

AP101T, AP141T & AP10 systems to be free from defects in 
material and workmanship for ten (10) years from the date 
of purchase. The disposable filter cartridge is warranted 
from defects in material and workmanship for a period of 
one (1) year from the date of purchase. This warranty does 
not cover failures resulting from abuse, misuse, alterations 
or damage not caused by 3M Purification Inc. or failure 
to follow installation and use instructions. No warranty 
is given as to the service life of any filter cartridge or 
membrane as it will vary with local water conditions and 
water consumption. 

3M PURIFICATION INC. MAKES NO 

OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IM-
PLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 
WARRANTY OR CONDITION OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED 
WARRANTY OR CONDITION ARISING OUT OF A COURSE 
OF DEALING, CUSTOMER OR USAGE OF TRADE.

 If the 

Product fails to satisfy this Limited Warranty during the 
warranty period, 3M Purification Inc., at it’s option, will 
replace the Product or refund your Product purchase price. 
This warranty does not cover labor. 

The remedy stated 

in this paragraph is Customer’s sole remedy and 3M 
Purification Inc.’s exclusive obligation.

This warranty gives you specific legal rights, and you may 
have other rights which may vary from state to state, or 
country to country. For any warranty questions, please call 
800.222.7880 or mail your request to: Warranty Claims, 
3M Purification Inc., 400 Research Parkway, Meriden, CT 
06450. Proof of purchase (original sales receipt) must 
accompany the warranty claim, along with a complete de-
scription of the Product, model number and alleged defect.

Limitation of Liability: 

3M Purification Inc. will not 

be liable for any loss or damage arising from this 3M 
Purification Inc. product, whether direct, indirect, special, 
incidental, or consequential, regardless of the legal theory 
asserted, including warranty, contract, negligence or strict 
liability. Some states and countries do not allow the exclu-
sion or limitation of incidental or consequential damages, 
so the above limitation or exclusion may not apply to you.

LIMITED WARRANTY

6

Содержание AP11T





















Отзывы: