6
78-8126-9537-3-B
2.6 Select the roll of 1" (25 mm) wide Scotch® Sealing Mastic 2229 from the kit and cut a length of the mastic.
Using light tension, apply a single wrap of mastic around the cable jacket over the ground braid solder blocks
and the previously applied mastic. (
Figure 7
)
ND-ASTIC3TRIP
OVERSOLDERBLOCKSMASTICROLLS
Figure 7
2.7 Wrap two half-lapped layers of highly-tensioned Scotch® Vinyl Electrical Tape Super 88 over the mastic seal and
constant force springs. Cover all exposed mastic, constant force springs and tape shield, overlapping 0.25" (6
mm) onto the exposed cable semi-con. (
Figure 8
)
Note: Take care not to cover the exposed semi-con. A minimum of 2.5" (75 mm) of semi-con must be exposed.
#ABLE*ACKET
/VERLAP3EMI#ON
MM
6INYL4APE
3EMI#ON
Figure 8
